)
iQuest iRIS 300 - GPRS Equipped Datalogger
Home » iQuest iRIS 300 - GPRS Equipped Datalogger
iRIS 300 - GPRS Equipped Datalogger
The iRIS 300 has been designed as a cost effective, self contained datalogger combining full logging capability and data storage with an integral GPRS modem and rechargeable battery.
Downloads
Product Description
The iRIS 300 (iQuest Remote Information Source) has been designed as a cost effective, self contained datalogger/information source for use in a wide range of information gathering applications, such as flow meterering, power metering, rain gauges etc.
It is supplied in an environmentally sealed (IP65) enclosure. with a small keypad and 4 line x 12 character LCD display with graphical icons, 128K flash memory, a standard DTE RS232 and self contained GSM/GPRS modem. Power requirements are kept to an absolute minimum. Actual average current consumption is very configuration dependent).
iRIS comes complete with an internal 6V @ 1.2Ahr rechargeable SLA battery. An integral charger supports the use of external power supplies from 8-30V d.c. This feature allows direct connection of a small solar panel. Supply input is over voltage and reverse polarity protected.
It is supplied in an environmentally sealed (IP65) enclosure. with a small keypad and 4 line x 24 character LCD display with graphical icons, 64K flash memory, a standard DTE RS232 and self contained GPRS modem. The unit has an on-board real-time clock and is fully Year 2000 compliant. Power requirements are kept to an absolute minimum. Actual average current consumption is very configuration dependent.
Power Supply
Internal 6V @ 1.2Ahr rechargeable SLA battery. An integral charger supports the use of external power supplies from 8-30V d.c. This feature allows direct connection of a small solar panel. Supply input is over voltage and reverse polarity protected.
Physical Dimensions
117mm W x 162mm H x 65mm D
Environmental Limits
-10oC - +70oC. Enclosure sealed to IP65.
Mass
1970 g
Mounting
4 x mounting holes through rear if case (M4 counter-sunk head screws). Cable access is via compression glands.
Digital I/O
2 x Standard General Purpose Digital Inputs 0-12V DC in or clean contact to 0V. These are paired with High Speed Counters (max 5kHz)
2 x Open-Drain Pull-down Sinking Outputs Max 300mA @ 30V
Analogue I/O
2 x 12 bit uni-polar analogue inputs. Maximum range 0-5V, although other ranges are software configurable.
Additional internal analogue measurements available for monitoring/logging are:
Temperature, Battery Voltage and Supply Voltage.
Communications
1x RS232 DB9 – DTE configuration. (Only accessible when case open).
1x Integral Tri-Band GSM/GPRS modem with two concurrent data ports.
Interference
To comply with AS/NZS 3548-1992 (CISPR 22-1985) with respect to Class A Electromagnetic Interference.
Memory
8K volatile RAM and 128K flash memory. Datalogging storage is 4,096 time-stamped data points.
Programming
Factory loaded standard application program supplied. This uses simple text based configuration menus. Configuration access through the RS232 port is via standard terminal program such as HyperTerminal or through GPRS via iQuest’s iLink or UDPTerminal software packages.