)
Greenspan Turbidity Sensors
Home » Greenspan Turbidity Sensors
Greenspan Turbidity Sensors TS100 TS300 and TS1200
The Greenspan Analytical Turbidity Sensors provide accurate and precise turbidity reading over a range of adverse environmental conditions.
Product Description
Applications:
Effluent monitoring
River and stream measurements
Estuaries and runoff studies
Forestry and catchment monitoring
The Greenspan Turbidity Sensor utilizes a infrared optical system to detect backscatter intensity of suspended particles in a water and a reduction in water clarity. The design includes an advanced optical surface treatment to resist fouling. Digital temperature compensation technology ensures stable performance over a wide temperature range.
The TS 300 includes internal data logging.
Outputs
TS100 4-20mA, 0-2.5v, 0-1v
TS1200 SDI-12
Standard ranges available 0-100 NTU 0-250 NTU 0-500 NTU 0-1000 NTU Other ranges available on request
Linearity +/-2% +/-2%
Temperature compensation 0-50c 0-50C
Supply voltage 9-27V Reverse polarity protected-Surge protected to 2kV
Wetted materials 316 stainless steel, Delrin, acrylic
TS100 Specs
Outputs 4-20mA 0-1V 0-2.5V
Quiescent current 80mA
Warm up time to stable reading 2 secs
Dimensions length 10.8in (275mm)
1.8in (45mm) OD Stainless
1.9in (48mm) OD Delrin
Weight
15oz (425g) Delrin
19.6oz (555g) Stainless
TS300
Outputs RS232
Quiescent current 30uA-110mA
Warm up time to stable reading 2 secs 1 sec
Dimensions
Length 10.8in (275mm)
1.8in (45mm) OD Stainless
1.9in (48mm) OD Delrin
optional battery pack adds extra 10.25in (260mm) to length
Weight
16.6oz (470g) Delrin
21.2oz (600g) Stainless
Software supplied AQUAGRAPH
Product Number Description
Specify Stainless or Delrin body
700-0502 TS100 Output 4-20mA, Bare Wire Connection as Standard
700-3702 TS1200 Output SDI-12, Bare Wire Connection as Standard
700-0602 TS300 Includes additional electronics for large capacity data storage, advanced calibration and linearisation program, computer compatible outputs for direct connection between sensor and PC, time and event triggering. Output is RS232
If choosing moulded cable, a standard HS7 is fitted to this sensor.
Ancillary Equipment
SDI-100 SDI-12 Converter Box - provides SDI-12 output from 4-20mA sensor
SDI-200 SDI-12 Converter Box - provides SDI-12 output from a RS232 sensor
SA-100 Communication Interface between sensor and rain gauge, auto-sampler
SDI-400 SDI-12 Interface Adapter for calibration via Windows Cal-Tech Software
TP-100 Turbidity Lens Cleaning Pump
Specify Cable length for Pump Pump power cable: Cost per metre
TR-100 Turbidity Calibration Kit
Options for TS Sensors
FOR ALL TS SENSORS Optional WP7 Connector (Note a Detachable WP7 Cable will be required as well)
FOR TS300 ONLY Optional Battery Pack with WP7 (Note a Detachable WP7 Cable will be required as well)
FOR TS300 ONLY Optional Battery Pack with internal Communications connector
FOR TS300 ONLY Optional Battery Pack with cable
5BPK-102 Battery Pack Cell Replacement Kit
FOR TS300 ONLY CX18 Connector - required for use with sampler trigger and rain gauge input